With the noodle machine processing noodles, according to user needs to adjust the thickness of noodles, generally adjust the degree of screw extrusion can be, after the noodle machine shutdown how to maintain it? Here are some points:
Before shutdown, self-curing small hopper, wire extruding small hopper, adding a small amount of water, turn off the main switch when running, remove the stuffy cover, remove the screw blade, exit the screw, soak in water, clean up.
1. Lubricant replacement: After 1-2 weeks of operation, the new noodle machine must be replaced with lubricant, then according to the cumulative length of operation, 6-12 months to replace a new oil.
2. For heavily clogged screens: If you can't clean up after soaking in water, you can put the screens in boiling water for a while and then clean them up.
3. Check the connection screw of the noodle machine regularly. After each shutdown, besides cleaning the working parts, the dust on the machine surface should be cleaned up in time.
After the noodles machine shut down, also want to do a good job of maintenance, so as to extend its service life, if you want to use noodles machine processing noodles, come to my company to buy equipment.